The high pressure polyurethane insulation painting machine is used by professionals for spray painting and architectural coatings. It sprays an even coating of polyurethane onto surfaces using an air pressurized spray gun. The pump and the spray gun have the right measurements to prevent over painting, keep the coating precise, and the speed even when temperature, pressure or viscosity alterations occur.
This high pressure polyurethane insulation spray foam machine is light and easy to move around in order to reach difficult application areas. It is computer controlled, and clears automatically so new settings can be input into the system. The entire set includes the JHPK-F2008 mainframe, spray gun, 1.5m of connection pipe for the spray gun, 15m of heating and preserved pipe, and 2 sets of transfer pumps.
Technical Parameters of the High Pressure Polyurethane Insulation Painting Machine
|Ratio of raw materials||1 ： 1 (fixed ratio)|
|Viscosity range of raw materials||200-1000 CPS(under working temperature)|
|Heating device power for material||1250 W x2|
|Heating power for pipe heating preservation||2000 W|
|Total power||4500 W|
|Air source requirements||0.5-0.8Mpa(70-120psi)≥0.9m3/min|
|Single material output output pressure|| 5-10 Mpa
Our high pressure polyurethane insulation painting machine is an ideal spray painting equipment or architectural coatings. The spray machine applies an even coating of polyurethane onto the surface of storage, outer walls and roofs through the use of an air-pressurized spray gun. The spray gun features an innovative technology that allows for a high pressure spray power at low volume feed rates for a better spray coverage and less overspray. The spray gun can also be used for electrostatic spray painting on car body panels, bike frames, electric tools, guardrails and more.
Other search items: spray foam systems / equipment, spray foam proportioner / proportioning unit